Facebook Google Plus Twitter LinkedIn YouTube RSS Menu Search Resource - BlogResource - WebinarResource - ReportResource - Eventicons_066 icons_067icons_068icons_069icons_070

Tenable Blog

Subscribe

CVE-2021-1609: Critical Remote Code Execution Vulnerability in Cisco Small Business VPN Routers

Cisco releases patches for Critical vulnerabilities in its line of Small Business VPN Routers.

Background

On August 4, Cisco released several security advisories, including an advisory for two vulnerabilities in a subset of its line of Small Business VPN Routers.

CVEDescriptionCVSSv3
CVE-2021-1609Web Management Remote Code Execution and Denial of Service Vulnerability9.8
CVE-2021-1610Web Management Command Injection Vulnerability7.2

The table below lists which routers in the Small Business line are vulnerable:

Cisco Small Business Router ModelStatus
RV340 Dual WAN Gigabit VPN RouterVulnerable
RV340W Dual WAN Gigabit Wireless-AC VPN RouterVulnerable
RV345 Dual WAN Gigabit VPN RouterVulnerable
RV345P Dual WAN Gigabit POE VPN RouterVulnerable
RV160 VPN RouterNot Vulnerable
RV160W Wireless-AC VPN RouterNot Vulnerable
RV260 VPN RouterNot Vulnerable
RV260P VPN Router with PoENot Vulnerable
RV260W Wireless-AC VPN RouterNot Vulnerable

Analysis

CVE-2021-1609 is a critical-rated vulnerability in Cisco’s web management interface for Cisco Small Business routers that was assigned a CVSSv3 score of 9.8. According to Cisco, the flaw exists due to improper validation of HTTP requests. A remote, unauthenticated attacker could exploit the vulnerability by sending a specially crafted HTTP request to a vulnerable device, resulting in arbitrary code execution as well as the ability to reload the device, resulting in a denial of service.

CVE-2021-1610 is a high-rated command injection vulnerability in the same web management interface. While both flaws exist due to improper validation of HTTP requests and can be exploited by sending specially crafted HTTP requests, CVE-2021-1610 can only be exploited by an authenticated attacker with root privileges. Successful exploitation would grant an attacker the ability to gain arbitrary command execution on the vulnerable device’s operating system.

Cisco is careful to note that both of these vulnerabilities can be exploited independently of each other, and that some versions of the Small Business VPN Router software may only be affected by one of the two vulnerabilities.

Web management interface default exposure is limited

Cisco’s advisory clarifies that the web management interface for its small business VPN routers is available by default through local area network connections and can’t be disabled. Under this default configuration, a local attacker could potentially gain arbitrary code execution. However, Cisco notes that remote management of these devices is disabled by default.

Example of a remotely accessible Small Business VPN Router login page

Over 8,800 devices publicly accessible

Despite the remote management feature being disabled by default, Tenable’s Security Response Team found over 8,800 devices publicly accessible according to BinaryEdge. The table below lists the publicly accessible devices.

Affected DevicePublicly Accessible
RV3405,679/5,673
RV340W684/685
RV3451,845
RV345P642
Total8,850

Cisco VPN routers historically targeted

In January 2019, Cisco published advisories for two different vulnerabilities in its RV320 and RV325 WAN VPN routers. A few days after the advisories were published, proof-of-concept exploit scripts for these flaws were published, which was followed by active scanning for vulnerable devices. Because of this historical precedent, we believe it is important that organizations patch these latest vulnerabilities as soon as possible.

Proof of concept

At the time this blog post was published, there were no proofs-of-concept (PoC) available for either CVE-2021-1609 or CVE-2021-1610.

Solution

Cisco says that firmware version 1.0.03.22 and later fixes these vulnerabilities in the affected versions of its Small Business VPN Routers. Organizations are strongly encouraged to patch these routers as soon as possible.

If patching is not feasible at this time, a way to mitigate the threat of remote exploitation would be to disable the remote management feature on these devices.

Under the Firewall section, select the Basic Settings menu option then ensure that “Remote Web Management” is unchecked. As mentioned previously, this setting is unchecked — disabled — by default. If it has been enabled, uncheck it and press Apply to update the configuration.

Identifying affected systems

A list of Tenable plugins to identify these vulnerabilities will appear here as they’re released.

Get more information

Join Tenable's Security Response Team on the Tenable Community.

Learn more about Tenable, the first Cyber Exposure platform for holistic management of your modern attack surface.

Get a free 30-day trial of Tenable.io Vulnerability Management.

Related Articles

Cybersecurity News You Can Use

Enter your email and never miss timely alerts and security guidance from the experts at Tenable.